Saab 93 Key Fob Replacement
Saab 93 key fobs are costly to replace. However the procedure is easy.
All you require is a flathead screwdriver, and some patience. The screwdriver should be inserted into the middle of the case, and slowly lift it.
It is recommended to keep spare keys and fobs. They can save you from being stuck or paying towing fees.
How to Replace a Battery
Key fobs in all cars that lock and unlock the vehicle remotely have batteries inside which will eventually die. When this occurs owners can change the battery on their key fob themselves in a few easy steps. The key fob comes with two plastic flaps on one side that you have to open in order to take out the battery that was in use and replace it with the new one. The replacement battery is a standard CR1632 coin cell and the procedure for installing it is relatively simple.
After the emergency key has been removed, you can employ a small screwdriver for splitting the case of the remote fob. Be careful not pushing it too much, as the electronic components inside the case are delicate and could be damaged if you apply too much pressure.
Saab created some fantastic cars. Many of them are still in circulation today. One of the biggest problems with these cars is the ignition keys. They're not very robust, and they may become spongy or lose their grip over time. It is expensive for an Saab owner to purchase a new key from a dealer when they lose their one functioning key. They'll need to replace the computer module, and then program the new key to convince the car that you are not attempting to steal it. The good thing is that you could save a lot of dollars by simply replacing the case instead.
How to remove the manual key?
Batteries are present in all key fobs used in the process of lock and unlock vehicles. They are of a limited duration. If you are like most people, it will eventually die. It's easy to replace the batteries for your key fobs that are manual. The only problem with the process is removing the old battery from the case. But with patience and a flathead screwdriver you can do it.
Once you have the new battery installed It's now time to put everything back together. You'll require a flathead to open the replacement case of the key fob. Insert the screwdriver into the slot that is in the middle. Then, gently work the case until it splits, then you can remove it from the key fob.
If the previous keyfob lost its connection to your safety system of your car, you may need to reprogram the new one. You can do this by using the manual learning method to create a new FOB for your Saab 9-5. This method DOES NOT make any changes to previously learned keys. You can continue to use the existing FOBs if you require reprogramming them. This procedure can only be initiated if the mechanical key of the vehicle matches the cut on the FOB.
How to change the case
It's a good idea to replace both the case and the battery when changing the manual key or the battery. The cases wear out quickly, particularly after heavy use. It's simple to change the case of your SAAB 9-3, and you won't need any special tools.
The first step to change the case is to remove the manual key from the key fob. This can be done by pressing the SAAB logo and pulling out the manual key. saab 9-3 key not accepted contact service may be necessary to apply a little force in order to remove the manual key from the fob.
Once you've removed the manual key, you can start taking the electronic components from the case. You'll require a flathead screwdriver for this. You'll need to take care not to damage the electronics inside, so be careful when using your screwdriver. After you've removed the electronics, you'll have to remove the battery. After you have replaced the battery you can put everything back in a new case. You can purchase replacement cases online for a very low price.
How do I program the new key?
Key fobs that allow you to lock and unlock your vehicle remotely, come with batteries. However they have a limited time of life. It is important that you replace the battery on your key fob at a minimum every three to four years. Fortunately this is a simple process that can be done at home. All you require is patience and an inexpensive screwdriver with a flat head.
First, take off the manual key. You can do this by pressing the blue SAAB logo on the key fob and pulling the emergency key out. The key should pop out with a bit of force. Once you have opened the key fob, you are able to remove the battery by gently pushing the screwdriver into the slot in the middle. This will split the case which makes it easier to access the electronics.
Once you have the new battery and key fob case installed Now is the time to program the new key. You can do this by following the steps outlined in this video from YouTube user Cyclone Cyd. This is an excellent video channel that offers tips on how to carry out simple repairs and maintenance on cars.
Key fobs are an excellent way to keep an extra key for your car in the event you lose or break it. You can buy a brand new keyfob through the internet or from a local locksmith such as United Locksmith. The price is less than a dealership which will charge you for the key and programming it to your car.